HAMLEY WADE The tree of this saddle is a bullhide covered Wade roper with a roughout seat in 15 1/2", 16" or 17'. The rigging is 7/8 double stainless plate. The horn is a 4"x4" rawhide bound and mule wrapped. The cantle is 4" with a 1" cheyenne roll and the stirrups are 4" bell. The finish is hand stamped Hamley swirl tooling in roughout or smoothout halfbreed with outside stirrup leathers, long saddle strings and a pecan finish with polished edge's and sporting Montana Silversmith conchos. The smoothout comes in 15 1/2" and 16" only. The weight of this saddle is around 45 lbs. Cost as follows. Sug. list= 15 1/2"--$2200.00 16"--$2230.00 17"--$2280.00 Our price= 15 1/2"--$1220.00 16"--$1240.00 17"--$1260.00 = shipping.

CROTON CREEK RANCHER The tree is a modified association, bullhide covered with a 16" roughout seat. The rigging is 7/8 stainless plate with rear dees and it has 5" cantle with cheyenne roll. The horn is a short post with rawhide binder and the stirrups are 4" rawhide bell. The finish is roughout/smoothout with barbed wire border tooling. It weighs appr. 44 lbs. List price--$1950.00 Our price= $1090.00 + shipping.

COWBOY RANCH SADDLE The tree is a bullhide covered BC cowboy tree with a 16" hard seat. Full double rigging with stainless steel dees and the horn is a short post with rawhide binder. The cantle is a 5" oval with rawhide binder and the stirrups are 3" deep ropers. The finish is natural with 3/4 basket stamped and long strings. Weighs around 44 lbs. List price is $2130.00 Our price is $1175.00 + shipping.

SMOOTHOUT WADE The tree is a bullhide covered wade with a 16" hard seat with a 4" highback cantle with rawhide binder. Rigging is 7/8 stainless plate with rear slots and horn is a 3" x3" post w/rawhide binder. The stirrups are 3" rawhide deep roper and it has a natural finish with handstamped basket tooling. It weighs around 40 Lbs. List price is $1930.00---Our price is $1075.00 + shipping.

ROANOKE RANCHER The tree is a bullhide Billy Cook roper and has a roughout seat in 3 sizes. The riggin is full double with stainless steel dees and the cantle is 5" oval w/rawhide binder. It has a 3" post horn w/rawhide binder and 3" rawhide roper stirrups. The finish is roughout seat, jockey and fenders w/barbed wire border tooling with the skirts, back housing, and swell in natural with oak leaf corners polished edge's and long strings. Weighs around 45 lbs. The list price as follows. 15 1/2"-$2000.00 16"-$2030.00 17"-$2060.00 Our price= $1200.00 16"- $1220.00 17"-1240.00 + shipping.

BILLY COOK CARLOS WADE It's built on a bullhide Wade roper tree with a roughout seat in 2 sizes and the cantle is 4" with a 1" cheyenne roll. The rigging is 7/8 stainless plate and the horn is a 4"x 4" post with rawhide binder with muleskin wrap. The stirrups are 4" rawhide bell. It has hand stamped Carlos border tooling in roughout or smoothout with a show walnut finish and long strings. Weighs approx. 45 lbs. Sug. list= 16"--$1740.00 17"--$1770.00 Our price= 16"--$1185.00 17"--$1195.00

03-22-06
copyright2006
Steves' Saddle and Repair